Konstrukt Construction ChemicalsCONSTRUCTION CHEMICALS

K222 Interior Render

 

Features:
 
Description: Konstrukt® Permaplast™ Render K222 is a cement-based plaster used to level uneven concrete substrates with large holes and cracks up to 8mm thickness.
 
Principal Uses:
  • Fixes wall imperfections from 3mm to 8mm thick.
  • Body filler prior to application of K201 Konstrukt® Permaplast™ High Performance Acrylic Skimkote.
  • Minimizes cracking.
  • Improves alkali resistance.
 
PRACTICAL COVERAGE: 5 to 6 sq.m./25 kilo bag/ 
SURFACE DRY: 30 min.
APPLICATION: Apply with trowel or putty knife.
PACKAGING: 25 kg per bag
POTLIFE: Thirty (30) minutes
FULL CURE: 3 Days
 
Mixing Procedure:
 
Mix Konstrukt® Permaplast™ Render K222 (25-kilo bag) with 6 liters of water into a plastic or aluminum pail container. Stir with a mixing device until trowelable consistency is attained. Ready mixture should be used within 1-2 hours after mixing. Avoid addition of water into the mixture that has begun to set; it might weaken properties of the product.
 
APPLICATION:
  1. Using a steel trowel, apply the mixture on uneven surfaces, initially to surface with deep opening not more than 8mm.
  2. Let it dry for thirty (30) minutes before applying second coat (if needed).
  3. For smooth finish, apply Konstrukt® Permaplast™ Skimkote K201 over Konstrukt® Permaplast™ Render K222 after 3 days.
Note: Do not apply on painted surfaces.

Tileworks K302 with K321

K321 Tile Adhesion Promoter

DESCRIPTION: Konstrukt® Tileworks™ K321: Tile Adhesion Promoter is an acrylic-based liquid emulsion to be mixed with Konstrukt Tileworks. It is used to prepare smooth, absorbent and non-absorbent substrates prior to the application of Konstrukt Tileworks™ K302 for tiles, natural or synthetic stones, etc. It is mixed with water for tile-on-tile and heavy duty application
 
ADVANTAGES
  • Promotes adhesion of tile for tile-on-tile or heavy-duty application 
  • Increases compressive and flexural strengths of tile adhesive making it more durable
  • Can be used for both indoors or outdoors application
K302 All-purpose Tile Adhesive
 
DESCRIPTION:  Konstrukt® Tileworks™ K302 All-purpose Tile Adhesive is a cement-based adhesive formulated for installing and fixing ceramic Tiles on horizontal and vertical concrete surfaces for thin-bed or thick-bed application
 
PRODUCT DATA
 
Mixing Ratio: 25 kg of compound to 6L of water (gradual mixing)
Application: thin-bed or thick-bed application
Open time: 15 minutes
Coverage: 4-5 sq m per 25 kg bag 
Packaging: 25 kg/bag
 
Storage: Konstrukt® Tileworks™ K302 All-purpose Tile Adhesive must be stored in a dry environment and protected from temperature extremes. Prolonged exposure of opened bags may shorten shelf-life of the product. 
 
INSTALLATION on CEMENT SUBSTRATE for HEAVY-DUTY APPLICATIONS:
  1. Mix K302 Konstrukt Tileworks All-purpose tile adhesive 25kg bag with six (6) liters of water into a plastic container and add ¼ liter of K321 Konstrukt Tileworks Adhesion Promoter
  2. Stir with a mixing device until trowellable consistency is attained
  3. Using a notched trowel spread the adhesive per one (1) square meter at a time. Apply up to 3mm minimum thickness
FOR HORIZONTAL APPLICATION
 
Add ¼ liter of K321 Konstrukt™ Tileworks™ Adhesion Promoter per 25 kg. of K302 Konstrukt™ Tileworks™ All-purpose Tile Adhesive
 

K103 Fast Setting Gypsum Compound

DESCRIPTION: Konstrukt® Durafill™ K103 Fast-Setting Gypsum Compound is a powder-type, all-purpose, gypsum-based filler to be used over joints and patching holes at least 3mm wide in dry walls. Highly recommended for high-build and fast curing applications prior to the finishing application of Konstrukt® Durafill™ K101 Gypsum Putty.

PRODUCT DATA
 
Mixing Ratio: 20 kg of compound to 9L of water (gradual mixing)
Application: 1st coat
Workability: 30-35 minutes
Coverage: 80 sq m per 20 kg bag 
Drying Time: 1-2 hours
Packaging: 20-kg/bag
Storage: Konstrukt® Durafill™ K103 Fast-Setting Gypsum Compound must be stored in a dry environment and protected from temperature extremes. Prolonged exposure of opened bags may shorten shelf-life of the product.
 
MIXING PROCEDURE
  • Use clean container and tools. Contamination may affect the setting time.
  • Mix only enough compounds for 30-35 minutes working time.
  • Mix by hand or with a power mixer until a lump free homogeneous paste is reached.
  • For best results, stand mixture for 2 minutes before use.

Tile on Tile Application

Konstrukt® Tileworks™ 

K321 Tile Adhesion Promoter
 
Description: Konstrukt® Permaplast™ K321: Tile Adhesion Promoter is an acrylic-based liquid emulsion to be mixed with Konstrukt Tileworks. It is used to prepare smooth, absorbent and non-absorbent substrates prior to the application of Konstrukt Tileworks™ for tiles, natural or synthetic stones, etc. It is mixed with water for tile-on-tile and heavy duty application
 
Advantages:
  • Promotes adhesion of tile for tile-on-tile or heavy-duty application 
  • Increases compressive and flexural strengths of tile adhesive making it more durable
  • Can be used for both indoors or outdoors application
K302 All-purpose Tile Adhesive
 
Description:  Konstrukt® Tileworks™ K302 All-purpose Tile Adhesive is a cement-based adhesive formulated for installing and fixing ceramic Tiles on horizontal and vertical concrete surfaces for thin-bed or thick-bed application
 
PRODUCT DATA
 
Mixing Ratio: 25 kg of compound to 6L of water (gradual mixing)
Application: thin-bed or thick-bed application
Open time: 15 minutes
Coverage: 4-5 sq m per 25 kg bag 
Packaging: 25 kg/bag
 
Storage: Konstrukt® Tileworks™ K302 All-purpose Tile Adhesive must be stored in a dry environment and protected from temperature extremes. Prolonged exposure of opened bags may shorten shelf-life of the product. 
 
Tile-on-tile Installation
 
Step 1: Surface Preparation
  1. Mix one (1) liter of K321 Konstrukt™ Tileworks™ Adhesion Promoter, one (1) liter of water, and three (3) kg of K 302 Konstrukt™ Tileworks™ All-purpose Tile Adhesive
  2. Mix and apply using a stiff brush on existing tiles.
  3. Dry for 3-4 hours or overnight before tiling
Step 2: Mixing
 
Mix K302 Konstrukt™ Tileworks™ All-purpose Tile Adhesive 25kg bag with six (6) liters of water into plastic container, and K321 Konstrukt™ Tileworks™ Adhesion Promoter. Follow the application chart for the quantity to be mixed, depending on application.
 
For Horizontal Application
 
Add ¼ liter of K321 Konstrukt™ Tileworks™ Adhesion Promoter per 25 kg. of K302 Konstrukt™ Tileworks™ All-purpose Tile Adhesive
 
For Vertical Application
 
Add ½ liter of K321 Konstrukt™ Tileworks™ Adhesion Promoter per 25 kg of K302 Konstrukt™ Tileworks™ All-purpose Tile Adhesive
 
Step 3: Application Procedure
  1. Stir with a mixing device until trowellable consistency is attained
  2. Using a notched trowel spread the adhesive per one (1) square meter at a time. Apply up to 3mm minimum thickness.

K302 All Purpose tile Adhesive

Description:  Konstrukt® Tileworks™ K302 All-purpose Tile Adhesive is a cement-based adhesive formulated for installing and fixing ceramic Tiles on horizontal and vertical concrete surfaces for thin-bed or thick-bed application

PRODUCT DATA
Mixing Ratio: 25 kg of compound to 6L of water (gradual mixing)
Application: thin-bed or thick-bed application
Open time: 15 minutes
Coverage: 4-5 sq m per 25 kg bag 
Packaging: 25 kg/bag
Storage: Konstrukt® Tileworks™ K302 All-purpose Tile Adhesive must be stored in a dry environment and protected from temperature extremes. Prolonged exposure of opened bags may shorten shelf-life of the product.
 
MIXING
  • Use clean container and tools. Contamination may affect the setting time.
  • Mix by hand or with a power mixer until a lump free homogeneous paste is reached.
  • For best results, stand mixture for 2 minutes before use.
APPLICATION
  1. Mix K302: Konstrukt® Tileworks™ All-purpose Tile Adhesive 25-kilogram bag with six (6) liters of water 
  2. Stir with a mixing device until desirable consistency is attained 
  3. Stand for two (2) minutes prior to use. 
  4. Wet substrate before application of tile adhesive 
  5. Use trowel to spread the adhesive per one (1) square meter at a time. Apply to desired level to smoothen the uneven surface of the flooring 
  6. Place and align tile by moving it back and forth. 
  7. Adjust height accordingly by gently tapping the tiles using the handle of the trowel or hammer.  Fix tiles immediately within fifteen (15) minutes open time.
 

K301 Thick-Bed Tile Adhesive

DESCRIPTION: Konstrukt® Tileworks™ K301 Thick-Bed Tile Adhesive is a cement-based adhesive formulated for installing and fixing ceramic tiles on uneven, irregular horizontal concrete surfaces.

PRODUCT DATA

Mixing Ratio: 25kg of Compound to 6L of water (gradual mixing)
Application: thick-bed application
Open time: 15 times
Coverage: 4-5 sq m per 25 kg bag
Packaging: 25kg/bag
Storage: Konstrukt® Tileworks™ K301 Thick-Bed Tile Adhesive must be stored in a dry environment and protected form temperature extremes. Prolonged exposure of opened bags may shorten shelf-life of the product.

MIXING

  • Use clean container and tools. Contamination may affect the setting time
  • Mix by hand or with a power mixer until a lump free homogeneous paste is reached
  • For the best result, stand mixture for 2 minutes before use

APPLICATION

  1. Mix K301 Konstrukt® Tileworks™ Tile Adhesive 25-kilo bag with six (6) liters of water into a plastic pail container.
  2. Stir with a mixing device until trowelable consistency attained.
  3. Stand for two (2) minutes prior use. Thick bed applications are only suitable on irregular, horizontal surfaces.
  4. Wet the substrate before applications of tile adhesive.
  5. Use a trowel to spread the adhesive per one (1) square meter at a time. Apply to desire level to smoothen the uneven surface of the flooring.
  6. Place and align tiles by moving it back and forth. Adjust height accordingly by gently tapping the tiles using the handle of the trowel or hammer. Fix tiles immediately within fifteen (15) minutes open time.

K201 High Performance Acrylic Skimkote

DESCRIPTION: Konstrukt® Permaplast™ High-Performance Skimcoat is a high performance, acrylic-based special bonding paste for interior and exterior use that is mixed with cement and applied on concrete to correct surface imperfections prior to painting. It repairs bubbles, honeycomb and concrete defects on waviness and plumbness from 1mm to 3mm thick.

PRINCIPAL USES
  • Fixes wall imperfections from 1mm to 3mm thick.
  • Minimize the use of putty during application.
  • Minimizes cracking and improve water resistance.
  • Excellent paint compatibility.
  • Improves alkali resistance.
  • Imparts a luxurious smooth look. 
  • Ideal for high-end coatings. 

PRODUCT DATA

Practical Coverage: 25 sq. m./ pail/ coat
Surface Dry: 30 min.
Application: Apply with trowel or putty knife.
Packaging: 20 kg per pail
Potlife: Thirty (30) minutes
Packaging: Available in 16-liter and 4-liter cans.
 
MIXING PROCEDURE
 
Put Konstrukt® Permaplast™ High-Performance Skimcoat on a suitable container (plastic bucket) and mix it with cement at 1:1 ratio by weight until a lump-free homogeneous paste is reached. Pot-life is thirty (30) minutes. Do not add water. Use Portland cement (for ordinary cement color) or white cement (to produce a white finish).
 
APPLICATION
  1. Using a steel trowel, apply the mixture thinly on the surface by pressing the edge of the trowel firmly on the concrete until all areas are covered.
  2. Let it dry for at least 30 minutes before applying the second coat (if necessary).
  3. If trowel marks are visible, let surface dry for at least 30 minutes before sanding to further smooth surfaces.
  4. No need to neutralize the surface.
Note: Do not apply on painted surfaces.

K201 High Performance Acrylic Skimkote

DESCRIPTION: Konstrukt® Permaplast™ High-Performance Skimcoat is a high performance, acrylic-based special bonding paste for interior and exterior use that is mixed with cement and applied on concrete to correct surface imperfections prior to painting. It repairs bubbles, honeycomb and concrete defects on waviness and plumbness from 1mm to 3mm thick.

PRINCIPAL USES

  • Fixes wall imperfections from 1mm to 3mm thick.
  • Minimize the use of putty during application.
  • Minimizes cracking and improve water resistance.
  • Excellent paint compatibility.
  • Improves alkali resistance.
  • Imparts a luxurious smooth look. 
  • Ideal for high-end coatings. 

PRODUCT DATA

Practical Coverage: 25 sq. m./ pail/ coat
Surface Dry: 30 min.
Application: Apply with trowel or putty knife
Packaging: 20 kg per pail
 Potlife: Thirty (30) minutes
Packaging: Available in 16-liter and 4-liter cans

MIXING PROCEDURE
 
Put Konstrukt® Permaplast™ High-Performance Skimcoat on a suitable container (plastic bucket) and mix it with cement at 1:1 ratio by weight until a lump-free homogeneous paste is reached. Pot-life is thirty (30) minutes. Do not add water. Use Portland cement (for ordinary cement color) or white cement (to produce a white finish).
 
APPLICATION
  • Using a steel trowel, apply the mixture thinly on the surface by pressing the edge of the trowel firmly on the concrete until all areas are covered.
  • Let it dry for at least 30 minutes before applying the second coat (if necessary).
  • If trowel marks are visible, let surface dry for at least 30 minutes before sanding to further smooth surfaces.
  • No need to neutralize the surface.

Note: Do not apply on painted surfaces.

K101 Gypsum Putty

DESCRIPTION: Konstrukt® Durafill™ K101 Gypsum Putty is an asbestos-free formulation, water-based, high quality gypsum putty to be used specifically over joints and patching holes on gypsum boards. It contains sufficient binder to secure the reinforcing tape and develops its strength and hardness with drying. The product has the advantage of minimal shrinkage, better crack resistance, excellent sandability and paint compatibility. It is best used as a finishing layer to either Konstrukt® Durafill™ K102 Titanium Putty or Konstrukt® Durafill™ K103 Fast-Setting Gypsum Compound.

PRODUCT DATA
 
Weight/Volume: 7 kg for 4L, 28 kg for 16L
Application: 2nd & Finishing Coat
Drying Time: 24 Hours
Coverage: 12.5 lm / liter
 
APPLICATION
  1. Tape embedded in joint compound at joints and interior angles, wiped with joint knife leaving thin coat of compound over tape.
  2. Accessories covered with one coat of joint compound.
  3. Fasteners covered with one coat of joint compound.
  4. Surface shall be free of excess joint compound.
  5. Tool marks and ridges are acceptable.
1st Coat - Bedding and Tapping
  1. Stir lightly if liquid separation is observed.
  2. Evenly fill the plasterboard joint recess with Konstrukt® Durafill™ K103 Fast-Setting Gypsum Compound using a plasterers’ broad knife. (A 3mm gap between boards is recommended to make sure enough material is used.)
  3. Center the joint tape and press down into the fresh plaster. Remove excess Konstrukt® Durafill™ K103 Fast-Setting Gypsum Compound with a broad knife drawn along the joint at an angle approximately 45 degrees to the plasterboard surface. Care should be taken to ensure no air bubbles remain below the tape. Sufficient putty should be left under and over the tape to ensure a proper bond.
  4. When the tape is embedded, apply a thin coat of Konstrukt® Durafill™ K103 Fast-Setting Gypsum Compound over fastener heads.
FINISHING COAT
  1. Apply a finishing coat of Konstrukt® Durafill™ K101 Gypsum Putty Over Konstrukt® Durafill™ K103 Fast-Setting Gypsum Compound. Feather joint edges at least 50mm beyond edges of second coat.
  2. Allow at least twenty-four (24) hours for Konstrukt® Durafill™ K101 Gypsum Putty to dry prior to painting. 
  3. After finishing of Konstrukt® Durafill™ K101 Gypsum Putty has dried completely, scrape back or sand back to a smooth finish.

K101 Gypsum Putty

DESCRIPTION: Konstrukt® Durafill™ K101 Gypsum Putty is an asbestos-free formulation, water-based, high quality gypsum putty to be used specifically over joints and patching holes on gypsum boards. It contains sufficient binder to secure the reinforcing tape and develops its strength and hardness with drying. The product has the advantage of minimal shrinkage, better crack resistance, excellent sandability and paint compatibility. It is best used as a finishing layer to either Konstrukt® Durafill™ K102 Titanium Putty or Konstrukt® Durafill™ K103 Fast-Setting Gypsum Compound.

PRODUCT DATA
 
Weight/Volume: 7 kg for 4L, 28 kg for 16L
Application: 2nd & Finishing Coat
Dring Time: 24 Hours
Coverage: 12.5 lm / liter
 
APPLICATION
  1. Tape embedded in joint compound at joints and interior angles, wiped with joint knife leaving thin coat of compound over tape.
  2. Accessories covered with one coat of joint compound.
  3. Fasteners covered with one coat of joint compound.
  4. Surface shall be free of excess joint compound.
  5. Tool marks and ridges are acceptable.
1st Coat - Bedding and Tapping
  1. Stir lightly if liquid separation is observed.
  2. Evenly fill the plasterboard joint recess with Konstrukt® Durafill™ K103 Fast-Setting Gypsum Compound using a plasterers’ broad knife. (A 3mm gap between boards is recommended to make sure enough material is used.)
  3. Center the joint tape and press down into the fresh plaster. Remove excess Konstrukt® Durafill™ K103 Fast-Setting Gypsum Compound with a broad knife drawn along the joint at an angle approximately 45 degrees to the plasterboard surface. Care should be taken to ensure no air bubbles remain below the tape. Sufficient putty should be left under and over the tape to ensure a proper bond.
  4. When the tape is embedded, apply a thin coat of Konstrukt® Durafill™ K103 Fast-Setting Gypsum Compound over fastener heads.
Finishing Coat
  1. Apply a finishing coat of Konstrukt® Durafill™ K101 Gypsum Putty Over Konstrukt® Durafill™ K103 Fast-Setting Gypsum Compound. Feather joint edges at least 50mm beyond edges of second coat.
  2. Allow at least twenty-four (24) hours for Konstrukt® Durafill™ K101 Gypsum Putty to dry prior to painting. 
  3. After finishing of Konstrukt® Durafill™ K101 Gypsum Putty has dried completely, scrape back or sand back to a smooth finish.

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Welcome to Konstrukt

Permaplast

Pacific Paint (Boysen) Philippines, Inc. is proud to introduce Konstrukt™, a wide range of construction chemical products created to address the demanding needs of today’s construction. Consumers can rest assured it carries the same high quality and superior durability that has made Boysen Paints the number one paint. To find out more about what Konstrukt has to offer please click on the product page.