Konstrukt Construction ChemicalsCONSTRUCTION CHEMICALS


Konstrukt Durafill


Contact Konstrukt


Tile Adhesive » K 302

Konstrukt® Tileworks™ K302 All-purpose Tile Adhesive

Konstrukt® Tileworks™ K302 All-purpose Tile Adhesive is a cement-based adhesive formulated for installing and fixing ceramic Tiles on horizontal and vertical concrete surfaces for thin-bed or thick-bed application

Mixing Ratio: 25 kg of compound to 6L of water (gradual mixing)
Application: thin-bed or thick-bed application
Open time: 15 minutes
Coverage: 4-5 sq m per 25 kg bag
Drying Time: 1-2 hours
Packaging: 25 kg/bag
Storage: Konstrukt® Tileworks™ K302 All-purpose Tile Adhesive must be stored in a dry environment and protected from temperature extremes. Prolonged exposure of opened bags may shorten shelf-life of the product.
  1. Use clean container and tools. Contamination may affect the setting time.
  2. Mix by hand or with a power mixer until a lump free homogeneous paste is reached.
  3. For best results, stand mixture for 2 minutes before use.
  1. Mix K302: Konstrukt® Tileworks™ All-purpose Tile Adhesive 25-kilogram bag with six (6) liters of water
  2. Stir with a mixing device until desirable consistency is attained
  3. Stand for two (2) minutes prior to use.
  4. Wet substrate before application of tile adhesive
  5. Use trowel to spread the adhesive per one (1) square meter at a time. Apply to desired level to smoothen the uneven surface of the flooring
  6. Place and align tile by moving it back and forth.
  7. Adjust height accordingly by gently tapping the tiles using the handle of the trowel or hammer. Fix tiles immediately within fifteen (15) minutes open time.

« Back to Products